Approx. Rs 33 / PieceGet Latest Price
|Power||075 HP to 208 HP|
|Outside Diameter||3.75 inch to 20.5 inch|
The purpose of fixing the flexible coupling is to transmit torque from one shaft to another, where misalignments may occur and also to absorb shock loads, etc Those machines which are going to be fitted with flexible couplings should first be well aligned. It is, only then that the coupling will deal with misalignments occurring due to heavy shaft loading by belt, temperature variations etc. Bearing wear or settling of machine foundations can also be a reason for causing extra loading on the coupling. Any or all of these conditions can occur after the machines have been coupled The Easyflex flexible coupling has been designed to transmit the torque through high tensile steel bolts and flexible bearings, to the machine input shaft- Since it is of the cushioned drive type, it can absorb shock loads, torsional vibrations and any misalignments* Very simple in construction, the Easyflex Pin Bush coupling is so designed that it transmits high powers and maximum speed. Though normally the flanges are of cast iron, but for higher speeds .flanges can be provided in good quality steel. This type of coupling will permit drive on either direction, does not require any lubrication nor adjustment after fitting. These flexible bearings remain unaffected either by dust, water or atmospheric conditions. Two identical halves form the couplings. The Rayon reinforced rubber bearings being driven into each half, while the holes for the connecting bolts, or pins, are alternately arranged between them, If desired only one half of the coupling may be used to connect to suitable holes in a fly-wheel or any existing flange adaptor, however, this will reduce by 50% the listed power of the complete coupling. The following listed couplings are of standard size. The flanges are available in Pilot Bore Standard Specifications unless otherwise specified - However, Finished Bore and sizes can be considered if the quantity is reasonable.